Slingpumps

 

Slingpumps
 
How It Works
  Model Specs

Water Pumps

Quick Move System

Water Filtration

Order Info

Contact Us

FAQ

History of Rife

How Rife Slingpumps Work

The whole pump unit is set in slow rotation by means of a propeller, which sets in motion by streaming water at axial level. The pump is held in position by a mooring or a stake in the stream bed.

On the inside of pump casing is a helically-wound poly hose. This hose is open at the rear end and attached to a swivel coupling at the front end.

The pump revolutions result in a alternate inflow of air and water, which forces water forward via the swivel coupling into the feeder hose which conveys the water to an intermediate storage tank or place on consumption. The pumped water thus oxygenated is supplied in a pulsating from.

He materials design used guarantee a durable product which will allow rough handling without breaking down. The pump is designed for continuous attendance-free operation far from the place of consumption. Consequently, the cost of the operation and maintenance is practically non-existent.

[How It Works] [Model Specs]


Rife Hydraulic Engine Mfg. Co. Inc.
PO Box 95, Nanticoke, PA 18634
Tel 570-740-1100   Fax 570-740-1101

Copyright (c) 1999
Site Designed and Hosted by Image Web Publishing