| Hand
Pumps Water Pumps
Quick Move
System
Water
Filtration
Order Info
Contact Us
FAQ
History of
Rife |
|
Specifications of Rife Hand Pumps
There are 5 components to a Hand Pump System:
- Pump Stand-- This Pump Stand has a built-in surge chamber, piston rod and packing
nut, adjustable strokes, and a multi-position cap. Use with Windmill, Pump Jack or Hand
Pump use. (Part # 10BHP)
- Sealed Pipe Flange
-- Attaches Pump Base to well casing. Available in 4"
(SPF-4), 5" (SPF-5), and 6" (SPF-6) sizes.
- 7/16" Pump Rod Threaded and Coupled
-- Connects the pump stand to the
cylinder.7/16" Rod Coupling.
- Cylinders:
Solid brass cylinders with a brass check valve and a two leather brass
plunger. (see table below)
- Drop Pipe—1 ¼" PVC or Galvanized (recommended). Call for pricing
Hand Pump Cylinder Depth Table
Part # |
Cylinder
Size |
5" Stroke
Depth
to Water (ft) |
7 ½" Stroke
Depth
to Water (ft) |
10" Stroke
Depth
to Water (ft) |
Max
Capacity
(Gal/Stroke) |
20BC |
2" |
201 |
140 |
108 |
.14 |
25BC |
2 ½" |
141 |
99 |
76 |
.21 |
30BC |
3" |
104 |
72 |
56 |
.31 |
Note: The above numbers were calculated based upon 50 lbs. of pressure
applied perpendicular to the pump handle. The numbers also include the hydraulic lift with
10% added for friction and weight of rod at minimum mechanical advantage which occurs at
mid-stroke.
Accessories
| 75HA |
Hand Pump Spout to Hose Adapter |
| 1SK |
Hand Pump Screen Kit |
With the Spout to Hose adapter you can pump the water wherever you need
it. So there is no need to carry the water, just run a garden hose from the pump to your
destination. The screen will filter out any debris that may be in the water. |